Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered.

• Removable synthetic liner boot for quick drying
• 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction
• Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth
• 0 to 25F / -18 to -4C Comfort

UPPER Coated microfiber with ballistic nylon underlays and ®Techtuff toe outside of a waterproof-breathable membrane.

MIDSOLE 3/4 length fiberglass-injected nylon nested inside EVA foam for reduced weight, added comfort and increased traction.

OUTSOLE 45NRTH real rubber outsole with anti-slip microglass rubber lugs, flat pedal and 2-bolt compatible. Comes with removable cleat plate for flat pedal use. A note on flat pedals: we recommend using 45NRTH's winter specific Helva and Heiruspecs pedals, and not aggressive downhill pedals with sharp metal pins.INSULATION200g Primaloft quilted inside removable liner boot; 2mm aerogel blanket under the foot to thermally block metal cleats

CLOSURE Single-zone BOA M3 mid-power reel and lacing systemLASTSXX-wide last with tall toe box for extra insulation on top of the foot

SUGGESTED TEMP RANGE0°F (-18°C) to 25°F (-4°C) Comfort

SIZES Mens wide 36 - 50 (no size 49), full sizes only

COLORBlack

MATERIALS Upper: Synthetic Leather, Polyester Mesh
Lining: Polyester
Outsole: Rubber

CARE INSTRUCTIONS Spot clean only
Do not soak or submerge
Do not force dry with direct heat
Click here for full care and maintenance instructions

Footwear Sizing Assistant

Items needed: pen or pencil, large sheet of paper, tape-measure in millimeters.

Measure wearing socks that you will most often wear with these boots. You will be taking measurements of both feet!

STEP 1: Place a sheet of paper flat on the floor. Sit on a chair and place one foot on the paper. Apply pressure to your foot and trace the shape of that foot on the paper, carefully holding the pen vertically and perpendicular to the paper, tracing the foot as closely as possible without angling the pen in or out.

STEP 2: Using a tape-measure, measure the distance from the very bottom of the heel to the top of the longest toe, as illustrated in points A and B on the diagram. It is necessary to measure in three-digit millimeters (for example: 292mm)

STEP 3: Measure the distance spanning the ball of the foot at its widest point, as illustrated in points C and D on the diagram, using two or three digit millimeter measurements depending on the size of your foot.

STEP 4: Repeat the above steps for your other foot and compare the measurements. Find the longer of the two length measurements between your right and left feet, as well as the wider of the two width measurements.

STEP 5: Enter the longest length measurement and the widest width measurement in three-digit millimeters IN THE BOXES BELOW. Only enter one length measurement and one width measurement!